2R SERIES

There is a reason Excel’s horizontal two ram balers are known for their outstanding functionality and quality. The proprietary combination of interlocking construction and integrated control systems produces an indestructible automated two ram baler. Thereby eliminating the need for a full-time operator.

View 2R9/10 Series Baler Product Data Sheet PDF

2R63 BALER

medium_ex63-mower-1-copy-products-1146995132

medium_e66-straight2-news-6087815116

hv-series

2r-series

angle-baler

medium_cm-2-news-8248836819

Save time, labor, and money with a complete turn-key solution for your baling needs. The 2R63 two-ram, auto-tie baler chassis utilizes the same interlocking designs found in larger EXCEL® two-rams while remaining very economical. The 2R63 is constructed of four solid steel sheets (top, bottom, and both sides), providing seamless construction from end to end. Combine this innovative engineering with our use of only the highest quality components, and the result is the very best in durability and function.

The EXCEL® Model 2R63 bales the following materials: Office Paper, Newspaper, OCC, magazines, PET, HOPE, Aluminum Cans, Time Cans, Printer’s Waste, and other materials.

The EXCEL® Model EX62/63 bales the following materials:
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials.
Standard Features Include:

Hydraulic door latch (EX63 only)
Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
The EX63F is manufactured standard with either left-hand or right-hand door swing
20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
Horsepower limited pressure compensated piston pump
Removable shear blade with four cutting edges
Six fully guided wire tie slots
Automatic bale sizing system
Automatic shear jam correction
Short-stroke feature to reduce cycle time
Complete with MV32 hydraulic oil
NEMA 12-rated enclosures and controls
Remote controls — according to door swing
Safety interlock door with decompression
Clean-out tool, grease gun and extra touch-up paint
One bundle of 12-gauge x 13-foot single loop wire ties
Sandblasted, primed and painted Excel Blue for long-lasting durability
Standard hopper
Lower photo eye
UL-, CUL-approved (CE available)
PLC -controlled operation
Available with an EXCEL® above-ground or inground conveyor for a turnkey system

Additional Features: Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox.
400 wear surfaces

Bale weights are based on actual customer surveys, and may differ with moisture content, material density, etc.Due to equipment upgrades, specifications are subject to change.

STRUCTURAL

HEIGHT: 62” Loading 52 1/2” Frame (158cm)
LENGTH: 179” (455cm)
WIDTH: 77” (196cm)
CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
FEED OPENING: 54” W (137cm) x 35” L (89cm)
BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
OIL RESERVOIR: 105 gal. (399 liters)
DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
ENCLOSURE: NEMA 12 Rated, UL Approved
CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
PLATEN PSI: 92 PSI (6.33 BAR)
CYCLE TIME: 29 sec. – 21 sec. Short Stroke
TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

OCC : 1,200 lbs. (544kg) TPH 3.3
MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
HDPE: 1,100 lbs. (499kg) TPH 2.3
PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

2R9/10 BALER

medium_ex63-mower-1-copy-products-1146995132

medium_e66-straight2-news-6087815116

EXCEL® couples interlocking construction with the most advanced control system in the industry for an indestructible, automated 2RAM Baler. EXCEL’s® design for automated operation eliminates the need for a full-time operator. EXCEL’s® superior quality means reduced down time, automatic operation and dramatic labor savings.

The EXCEL® Model 2R9/2R10 bales the following materials:

Office Paper, Newspaper, OCC, magazines, PET, HOPE, Aluminum Cans, Tin Cans, Painted Aluminum Siding, Insulated Wire, Aluminum Extrusions, Radiators, Copper Wire and Other Materials

The EXCEL® Model EX62/63 bales the following materials:
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials.
Standard Features Include:

Hydraulic door latch (EX63 only)
Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
The EX63F is manufactured standard with either left-hand or right-hand door swing
20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
Horsepower limited pressure compensated piston pump
Removable shear blade with four cutting edges
Six fully guided wire tie slots
Automatic bale sizing system
Automatic shear jam correction
Short-stroke feature to reduce cycle time
Complete with MV32 hydraulic oil
NEMA 12-rated enclosures and controls
Remote controls — according to door swing
Safety interlock door with decompression
Clean-out tool, grease gun and extra touch-up paint
One bundle of 12-gauge x 13-foot single loop wire ties
Sandblasted, primed and painted Excel Blue for long-lasting durability
Standard hopper
Lower photo eye
UL-, CUL-approved (CE available)
PLC -controlled operation
Available with an EXCEL® above-ground or inground conveyor for a turnkey system

Additional Features: Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox.
400 wear surfaces

Bale weights are based on actual customer surveys, and may differ with moisture content, material density, etc.Due to equipment upgrades, specifications are subject to change.

STRUCTURAL

HEIGHT: 62” Loading 52 1/2” Frame (158cm)
LENGTH: 179” (455cm)
WIDTH: 77” (196cm)
CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
FEED OPENING: 54” W (137cm) x 35” L (89cm)
BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
OIL RESERVOIR: 105 gal. (399 liters)
DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
ENCLOSURE: NEMA 12 Rated, UL Approved
CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
PLATEN PSI: 92 PSI (6.33 BAR)
CYCLE TIME: 29 sec. – 21 sec. Short Stroke
TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

OCC : 1,200 lbs. (544kg) TPH 3.3
MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
HDPE: 1,100 lbs. (499kg) TPH 2.3
PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

THE LATEST

Insights, articles, and tips that help you work smarter and faster.

News

Buying a Refurbished Baler? Beware & Careful

News

The Benefits of a Recycling Baler

News

Why Horizontal Baler vs Vertical Baler

More News

Frequently Asked Questions

Full-ejection horizontal recycling balers are best used for baling materials that are heavier and denser, such as metals, plastic bottles and textiles. The full-ejection design of these balers means that the bales are ejected from the chamber after they are formed, which allows for a more efficient and continuous baling process.

The full-ejection design also reduces the risk of materials becoming jammed in the baler, which can result in downtime and increased maintenance costs. This makes full-ejection horizontal recycling balers a good option for businesses and organizations that need to handle high volumes of dense or heavy materials and want to minimize downtime and maintenance requirements.

Another advantage of full-ejection horizontal recycling balers is their ability to produce uniform bales, which can result in higher recovery values. The full-ejection design ensures that each bale is compact and uniform in size, which can make it easier to transport and process the materials.

Overall, full-ejection horizontal recycling balers are a good option for businesses and organizations that need a reliable and efficient baling solution for dense or heavy materials, such as metal or plastic recycling facilities, textile manufacturers or industrial companies. They are particularly well-suited for situations where a high throughput of materials is required, and downtime and maintenance costs need to be minimized.

Full-penetration, closed-door horizontal balers are typically best used for volumes of baling ranging between two bales per day to 100 tons per month. They are used for more difficult to bale materials, such as metals, plastic bottles and sheet paper. They are far more efficient than vertical balers and more cost-effective and versatile than open-end balers.

Full-penetration closed-end balers are also often used in situations where space is limited, as the small footprint and inline feed configuration saves valuable floor space.

Another advantage of these balers is their ability to fully eject bales after tie-off. This results in an easy changeover of material grades. It also eliminates cross-contamination between bales.

Overall, full-penetration closed-end recycling balers are a good option for businesses and organizations that generate large volumes of material or difficult to bale materials.

A baler is a machine that is used to compress and bind recyclable materials such as cardboard, paper, plastics, and metals into compact and manageable bales. Baling is an important step in the recycling process for several reasons:

Saves space: Baling compresses the recyclable materials into dense, space-saving bales that take up less storage space. This is especially important in facilities where space is limited.

Improves efficiency: Baling reduces the number of trips required to transport the recyclable materials, thus improving efficiency and reducing transportation costs.

Increases revenue: Baled materials have a higher value in the recycling market than loose materials because they are easier to handle and transport. This means that baling can increase the revenue earned from selling recyclable materials.

Enhances safety: Baling reduces the risk of workplace injuries and accidents by keeping the recyclable materials contained and organized.

Overall, using a baler for recycling is a cost-effective and efficient way to manage and transport recyclable materials while reducing the environmental impact of waste.

Start the process

Let us help you waste less and recycle more today!

Get a Quote