EX Series

The horizontal baler that revolutionized the industry over 30 years ago! The Excel EX Series were the first “full penetration closed door balers” on the market. The innovative design enables the EX63 to bale a wide range of materials never before possible in a small horizontal baler. The EX63 provides automated feeding with minimal floor space. Excel’s commitment to the highest quality ensures many years of reliable performance and the best resale value in the industry.

The EX-Series horizontal balers are excellent for paper, cardboard, newspaper, aluminum and tin cans, PET, HDPE, textiles, foam and more. They are also well-suited for recycling paper and other recyclable products and produce the best mill-sized bales without preconditioning. Excel’s EX Series balers are designed to be the most durable, efficient and productive closed-end single-ram balers in the industry.

View EX62/63/63F/66/77 Product Data Sheet PDF

EX62/63 Series Baler

medium_ex63-mower-1-copy-products-1146995132

The EX63 produces high density bales of corrugated, paper, aluminum cans, tin cans, newspaper, PET, HDPE, textiles, and other recyclables. Full bale eject after each bale eliminates cross-contamiation when switching material grades. Reduces labor costs over 75% compared to vertial balers.

Standard features include:

Hydraulic door latch (EX63 only)
Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
The EX63F is manufactured standard with either left-hand or right-hand door swing
20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
Horsepower limited pressure compensated piston pump
Removable shear blade with four cutting edges
Six fully guided wire tie slots
Automatic bale sizing system
Automatic shear jam correction
Short-stroke feature to reduce cycle time
Complete with MV32 hydraulic oil
NEMA 12-rated enclosures and controls
Remote controls — according to door swing
Safety interlock door with decompression
Clean-out tool, grease gun and extra touch-up paint
One bundle of 12-gauge x 13-foot single loop wire ties
Sandblasted, primed and painted Excel Blue for long-lasting durability
Standard hopper
Lower photo eye
UL-, CUL-approved (CE available)
PLC -controlled operation
Available with an EXCEL® above-ground or inground conveyor for a turnkey system

Additional Features: Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox.
400 wear surfaces

Bale weights are based on actual customer surveys, and may differ with moisture content, material density, etc.Due to equipment upgrades, specifications are subject to change.

STRUCTURAL

HEIGHT: 100 1/2 ” Loading
LENGTH: 283″
WIDTH: 78 5/8″
CHAMBER FEED OPENING: 70″L x 54 1/2″ W
SHIPPING WEIGHT : 20,000

PERFORMANCE DATA

PUMP: 34 gal. (130 Liters) Pressure CompensatedHorse Power Limited Piston Pump4,000 PSI Rated
DIRECTIONAL VALVE: D08 Pattern, High Flow Cushion Shift
CYLINDERS: (2) 6″ (15cm) Bore x 124″
OIL RESERVOIR: 105 gal. (399 Liters)
DOOR LATCH CYL
MOTOR: 20 HP TEFC
ENCLOSURE
CONTROLS
HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE: 159,000 Lbs.
PLATEN PSI: 92 PSI
CYCLE TIME
TARGET BALE SIZE : 60″L x 48″W x 30″H

BALE WEIGHTS *

FOAM :1,200-1,600 lbs

Full-bale ejection, full-platen penetration, patented safety interlock door, tongue-and-groove floor, Hardox 400 wear surfaces

Bale weights are based on actual customer surveys and may differ with moisture content, material density and so on.
Due to equipment upgrades, specifications are subject to change.

EX62/63 Series Baler

medium_ex63-mower-1-copy-products-1146995132

EX63F Automated Closed End Baling Press is designed to bale a wide range of foam materials. The extra-large feed opening, and extra heavy-duty bale retainer dogs minimize material expansion into the infeed area. The large feed opening is also ideal for oversized corrugated. Excel Baler utilizes only the highest quality components available for optimal performance. Additional baling material include foam, OCC, plastics, cans, carpet padding and more.

Standard features include:

Hydraulic door latch (EX63 only)
Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
The EX63F is manufactured standard with either left-hand or right-hand door swing
20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
Horsepower limited pressure compensated piston pump
Removable shear blade with four cutting edges
Six fully guided wire tie slots
Automatic bale sizing system
Automatic shear jam correction
Short-stroke feature to reduce cycle time
Complete with MV32 hydraulic oil
NEMA 12-rated enclosures and controls
Remote controls — according to door swing
Safety interlock door with decompression
Clean-out tool, grease gun and extra touch-up paint
One bundle of 12-gauge x 13-foot single loop wire ties
Sandblasted, primed and painted Excel Blue for long-lasting durability
Standard hopper
Lower photo eye
UL-, CUL-approved (CE available)
PLC -controlled operation
Available with an EXCEL® above-ground or inground conveyor for a turnkey system

Additional Features: Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox.
400 wear surfaces

Bale weights are based on actual customer surveys, and may differ with moisture content, material density, etc.Due to equipment upgrades, specifications are subject to change.

STRUCTURAL

HEIGHT: 100 1/2 ” Loading
LENGTH: 283″
WIDTH: 78 5/8″
CHAMBER FEED OPENING: 70″L x 54 1/2″ W
SHIPPING WEIGHT : 20,000

PERFORMANCE DATA

PUMP: 34 gal. (130 Liters) Pressure CompensatedHorse Power Limited Piston Pump4,000 PSI Rated
DIRECTIONAL VALVE: D08 Pattern, High Flow Cushion Shift
CYLINDERS: (2) 6″ (15cm) Bore x 124″
OIL RESERVOIR: 105 gal. (399 Liters)
DOOR LATCH CYL
MOTOR: 20 HP TEFC
ENCLOSURE
CONTROLS
HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE: 159,000 Lbs.
PLATEN PSI: 92 PSI
CYCLE TIME
TARGET BALE SIZE : 60″L x 48″W x 30″H

BALE WEIGHTS *

FOAM :1,200-1,600 lbs

Full-bale ejection, full-platen penetration, patented safety interlock door, tongue-and-groove floor, Hardox 400 wear surfaces

Bale weights are based on actual customer surveys and may differ with moisture content, material density and so on.
Due to equipment upgrades, specifications are subject to change.

EX66/77 BALERS

medium_ex63-mower-1-copy-products-1146995132

medium_e66-straight2-news-6087815116

hv-series

2r-series

angle-baler

medium_cm-2-news-8248836819

EX63F Automated Closed End Baling Press is designed to bale a wide range of foam materials. The extra-large feed opening, and extra heavy-duty bale retainer dogs minimize material expansion into the infeed area. The large feed opening is also ideal for oversized corrugated. Excel Baler utilizes only the highest quality components available for optimal performance. Additional baling material include foam, OCC, plastics, cans, carpet padding and more.

Standard features include:

Hydraulic door latch (EX63 only)
Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
The EX63F is manufactured standard with either left-hand or right-hand door swing
20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
Horsepower limited pressure compensated piston pump
Removable shear blade with four cutting edges
Six fully guided wire tie slots
Automatic bale sizing system
Automatic shear jam correction
Short-stroke feature to reduce cycle time
Complete with MV32 hydraulic oil
NEMA 12-rated enclosures and controls
Remote controls — according to door swing
Safety interlock door with decompression
Clean-out tool, grease gun and extra touch-up paint
One bundle of 12-gauge x 13-foot single loop wire ties
Sandblasted, primed and painted Excel Blue for long-lasting durability
Standard hopper
Lower photo eye
UL-, CUL-approved (CE available)
PLC -controlled operation
Available with an EXCEL® above-ground or inground conveyor for a turnkey system

Additional Features: Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox.
400 wear surfaces

Bale weights are based on actual customer surveys, and may differ with moisture content, material density, etc.Due to equipment upgrades, specifications are subject to change.

STRUCTURAL

HEIGHT: 100 1/2 ” Loading
LENGTH: 283″
WIDTH: 78 5/8″
CHAMBER FEED OPENING: 70″L x 54 1/2″ W
SHIPPING WEIGHT : 20,000

PERFORMANCE DATA

PUMP: 34 gal. (130 Liters) Pressure CompensatedHorse Power Limited Piston Pump4,000 PSI Rated
DIRECTIONAL VALVE: D08 Pattern, High Flow Cushion Shift
CYLINDERS: (2) 6″ (15cm) Bore x 124″
OIL RESERVOIR: 105 gal. (399 Liters)
DOOR LATCH CYL
MOTOR: 20 HP TEFC
ENCLOSURE
CONTROLS
HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE: 159,000 Lbs.
PLATEN PSI: 92 PSI
CYCLE TIME
TARGET BALE SIZE : 60″L x 48″W x 30″H

BALE WEIGHTS *

FOAM :1,200-1,600 lbs

Full-bale ejection, full-platen penetration, patented safety interlock door, tongue-and-groove floor, Hardox 400 wear surfaces

Bale weights are based on actual customer surveys and may differ with moisture content, material density and so on.
Due to equipment upgrades, specifications are subject to change.

THE LATEST

Insights, articles, and tips that help you work smarter and faster.

News

Buying a Refurbished Baler? Beware & Careful

News

The Benefits of a Recycling Baler

News

Why Horizontal Baler vs Vertical Baler

More News

Frequently Asked Questions

Full-ejection horizontal recycling balers are best used for baling materials that are heavier and denser, such as metals, plastic bottles and textiles. The full-ejection design of these balers means that the bales are ejected from the chamber after they are formed, which allows for a more efficient and continuous baling process.

The full-ejection design also reduces the risk of materials becoming jammed in the baler, which can result in downtime and increased maintenance costs. This makes full-ejection horizontal recycling balers a good option for businesses and organizations that need to handle high volumes of dense or heavy materials and want to minimize downtime and maintenance requirements.

Another advantage of full-ejection horizontal recycling balers is their ability to produce uniform bales, which can result in higher recovery values. The full-ejection design ensures that each bale is compact and uniform in size, which can make it easier to transport and process the materials.

Overall, full-ejection horizontal recycling balers are a good option for businesses and organizations that need a reliable and efficient baling solution for dense or heavy materials, such as metal or plastic recycling facilities, textile manufacturers or industrial companies. They are particularly well-suited for situations where a high throughput of materials is required, and downtime and maintenance costs need to be minimized.

Full-penetration, closed-door horizontal balers are typically best used for volumes of baling ranging between two bales per day to 100 tons per month. They are used for more difficult to bale materials, such as metals, plastic bottles and sheet paper. They are far more efficient than vertical balers and more cost-effective and versatile than open-end balers.

Full-penetration closed-end balers are also often used in situations where space is limited, as the small footprint and inline feed configuration saves valuable floor space.

Another advantage of these balers is their ability to fully eject bales after tie-off. This results in an easy changeover of material grades. It also eliminates cross-contamination between bales.

Overall, full-penetration closed-end recycling balers are a good option for businesses and organizations that generate large volumes of material or difficult to bale materials.

A baler is a machine that is used to compress and bind recyclable materials such as cardboard, paper, plastics, and metals into compact and manageable bales. Baling is an important step in the recycling process for several reasons:

Saves space: Baling compresses the recyclable materials into dense, space-saving bales that take up less storage space. This is especially important in facilities where space is limited.

Improves efficiency: Baling reduces the number of trips required to transport the recyclable materials, thus improving efficiency and reducing transportation costs.

Increases revenue: Baled materials have a higher value in the recycling market than loose materials because they are easier to handle and transport. This means that baling can increase the revenue earned from selling recyclable materials.

Enhances safety: Baling reduces the risk of workplace injuries and accidents by keeping the recyclable materials contained and organized.

Overall, using a baler for recycling is a cost-effective and efficient way to manage and transport recyclable materials while reducing the environmental impact of waste.

Start the process

Let us help you waste less and recycle more today!

Get a Quote