We take pride in doing it better. At the outset over 30 years ago, we were willing to innovate, improve processes and navigate the complexities. We did it by breaking down old ways of doing things, embracing emerging technology, and just flat out building with quality materials and construction techniques.

We also did it by listening and translating your needs into well-received recycling solutions, and we proudly continue that same mindset into today’s recycling environment.

When you work with Excel Baler, you are buying less downtime, fewer repairs and most of all longevity. Isn’t that what you want at the end of the day? Our machines have stood the test of time. We’re happy to point out the differences such as better welds, components and superior structural design.

There are plenty of imitators out there and many will cheapen their product. We’ve seen it, and so have our new customers. Bring on your recycling needs and Excel will design products to your exacting standards and requirements.

After the thousands of machines, we’ve constructed over the years, you’d think we would have learned a few things—and we have. Every order teaches us something new. We’ve honed our craft, adopted better technology and improved our work methods.

We’re driven to exceed your recycling requirements from initial order through ongoing requests for service and parts long after installation.

EX62/63 SERIES BALER

EX63-StandardHopper
EX63-Mower
EX63-MachineFeed
medium_multimatcd
medium_ex63-mower 2
medium_ex63-mower
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
previous arrow
next arrow

The EX63 produces high density bales of corrugated, paper, aluminum cans, tin cans, newspaper, PET, HDPE, textiles, and other recyclables. Full bale eject after each bale eliminates cross-contamiation when switching material grades.  Reduces labor costs over 75% compared to vertial balers.

The EXCEL® Model EX62/63 bales the following materials: 
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials. 

Standard features include:

  • Hydraulic door latch (EX63 only)
  • Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
  • The EX63F is manufactured standard with either left-hand or right-hand door swing
  • 20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable shear blade with four cutting edges
  • Six fully guided wire tie slots
  • Automatic bale sizing system
  • Automatic shear jam correction
  • Short-stroke feature to reduce cycle time
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Remote controls — according to door swing
  • Safety interlock door with decompression
  • Clean-out tool, grease gun and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC -controlled operation
  • Available with an EXCEL® above-ground or inground conveyor for a turnkey system

STRUCTURAL

  • HEIGHT: 62” Loading 52 1/2” Frame (158cm)
  • LENGTH: 179” (455cm)
  • WIDTH: 77” (196cm)
  • CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
  • FEED OPENING: 54” W (137cm) x 35” L (89cm)
  • BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

  • PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
  • DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
  • CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
  • OIL RESERVOIR: 105 gal. (399 liters)
  • DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
  • MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • ENCLOSURE: NEMA 12 Rated, UL Approved
  • CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
  • HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
  • OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
  • PLATEN PSI: 92 PSI (6.33 BAR)
  • CYCLE TIME: 29 sec. – 21 sec. Short Stroke
  • TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

  • OCC : 1,200 lbs. (544kg) TPH 3.3
  • MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
  • NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
  • OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
  • HDPE: 1,100 lbs. (499kg) TPH 2.3
  • PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
  • ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
  • TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

  • Manufacturing and Industrial
  • Distribution Centers
  • Recycling Centers
  • Super Markets/Retail Centers

EX63F SERIES BALER

EX63F SERIES BALER

EX63F Automated Closed End Baling Press is designed to bale a wide range of foam materials. The extra-large feed opening, and extra heavy-duty bale retainer dogs minimize material expansion into the infeed area. The large feed opening is also ideal for oversized corrugated. Excel Baler utilizes only the highest quality components available for optimal performance. Additional baling material include foam, OCC, plastics, cans, carpet padding and more.

The EXCEL® Model EX62/63 bales the following materials: 
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials. 

Standard features include:

  • Hydraulic door latch (EX63 only)
  • Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
  • The EX63F is manufactured standard with either left-hand or right-hand door swing
  • 20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable shear blade with four cutting edges
  • Six fully guided wire tie slots
  • Automatic bale sizing system
  • Automatic shear jam correction
  • Short-stroke feature to reduce cycle time
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Remote controls — according to door swing
  • Safety interlock door with decompression
  • Clean-out tool, grease gun and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC -controlled operation
  • Available with an EXCEL® above-ground or inground conveyor for a turnkey system

STRUCTURAL

  • HEIGHT: 62” Loading 52 1/2” Frame (158cm)
  • LENGTH: 179” (455cm)
  • WIDTH: 77” (196cm)
  • CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
  • FEED OPENING: 54” W (137cm) x 35” L (89cm)
  • BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

  • PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
  • DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
  • CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
  • OIL RESERVOIR: 105 gal. (399 liters)
  • DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
  • MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • ENCLOSURE: NEMA 12 Rated, UL Approved
  • CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
  • HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
  • OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
  • PLATEN PSI: 92 PSI (6.33 BAR)
  • CYCLE TIME: 29 sec. – 21 sec. Short Stroke
  • TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

  • OCC : 1,200 lbs. (544kg) TPH 3.3
  • MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
  • NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
  • OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
  • HDPE: 1,100 lbs. (499kg) TPH 2.3
  • PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
  • ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
  • TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

  • Manufacturing and Industrial
  • Distribution Centers
  • Recycling Centers
  • Super Markets/Retail Centers

EX66/77 BALERS

medium_e66 straight2
medium_ex77
medium_ex77-renu-2
medium_ex77 renu 3
medium_ex77-renu 4
medium_ex77-renu 5
hqdefault1
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
medium_ex63-mower-1-copy-products-1146995132
previous arrow
next arrow

The EXCEL® Model EX66 bales the following materials: Office Paper, Newspaper, OCC, Magazines, PET, HOPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding & Textiles. EX77 also bales Aluminum Siding, Tin, Insulated Wire, Radiators, and other Light Non-Ferrous materials.

The EXCEL® Model EX62/63 bales the following materials: 
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials. 

Standard features include:

  • Hydraulic door latch (EX63 only)
  • Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
  • The EX63F is manufactured standard with either left-hand or right-hand door swing
  • 20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable shear blade with four cutting edges
  • Six fully guided wire tie slots
  • Automatic bale sizing system
  • Automatic shear jam correction
  • Short-stroke feature to reduce cycle time
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Remote controls — according to door swing
  • Safety interlock door with decompression
  • Clean-out tool, grease gun and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC -controlled operation
  • Available with an EXCEL® above-ground or inground conveyor for a turnkey system

STRUCTURAL

  • HEIGHT: 62” Loading 52 1/2” Frame (158cm)
  • LENGTH: 179” (455cm)
  • WIDTH: 77” (196cm)
  • CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
  • FEED OPENING: 54” W (137cm) x 35” L (89cm)
  • BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

  • PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
  • DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
  • CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
  • OIL RESERVOIR: 105 gal. (399 liters)
  • DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
  • MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • ENCLOSURE: NEMA 12 Rated, UL Approved
  • CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
  • HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
  • OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
  • PLATEN PSI: 92 PSI (6.33 BAR)
  • CYCLE TIME: 29 sec. – 21 sec. Short Stroke
  • TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

  • OCC : 1,200 lbs. (544kg) TPH 3.3
  • MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
  • NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
  • OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
  • HDPE: 1,100 lbs. (499kg) TPH 2.3
  • PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
  • ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
  • TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

  • Manufacturing and Industrial
  • Distribution Centers
  • Recycling Centers
  • Super Markets/Retail Centers

HV9/10 BALER

medium_hv10new2
medium_hv10
medium_hv10
medium_newhv101
medium_hv10new4
medium_hv10new6
medium_hv10-express-3
thumb_hv10-express-1
medium_hv-focus2-products
medium_hv-5
medium_ex77
hqdefault
medium_hv-focus7
medium_ex63-mower-1-copy-products-1146995132
medium_e66-straight2-news-6087815116
medium_e66-straight2-news-6087815116
hv-series
2r-series
2r-series
angle-baler
angle-baler
angle-baler
medium_cm-2-news-8248836819
medium_cm-2-news-8248836819
medium_cm-2-news-8248836819
medium_cm-2-news-8248836819
medium_ex63-mower-1-copy-products-1146995132
medium_e66-straight2-news-6087815116
medium_e66-straight2-news-6087815116
hv-series
2r-series
2r-series
angle-baler
angle-baler
angle-baler
medium_cm-2-news-8248836819
medium_cm-2-news-8248836819
medium_cm-2-news-8248836819
medium_cm-2-news-8248836819
previous arrow
next arrow

The EXCEL® Model EX62/63 bales the following materials: 
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials. 

Standard features include:

  • Hydraulic door latch (EX63 only)
  • Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
  • The EX63F is manufactured standard with either left-hand or right-hand door swing
  • 20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable shear blade with four cutting edges
  • Six fully guided wire tie slots
  • Automatic bale sizing system
  • Automatic shear jam correction
  • Short-stroke feature to reduce cycle time
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Remote controls — according to door swing
  • Safety interlock door with decompression
  • Clean-out tool, grease gun and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC -controlled operation
  • Available with an EXCEL® above-ground or inground conveyor for a turnkey system

STRUCTURAL

  • HEIGHT: 62” Loading 52 1/2” Frame (158cm)
  • LENGTH: 179” (455cm)
  • WIDTH: 77” (196cm)
  • CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
  • FEED OPENING: 54” W (137cm) x 35” L (89cm)
  • BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

  • PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
  • DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
  • CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
  • OIL RESERVOIR: 105 gal. (399 liters)
  • DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
  • MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • ENCLOSURE: NEMA 12 Rated, UL Approved
  • CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
  • HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
  • OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
  • PLATEN PSI: 92 PSI (6.33 BAR)
  • CYCLE TIME: 29 sec. – 21 sec. Short Stroke
  • TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

  • OCC : 1,200 lbs. (544kg) TPH 3.3
  • MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
  • NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
  • OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
  • HDPE: 1,100 lbs. (499kg) TPH 2.3
  • PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
  • ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
  • TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

  • Manufacturing and Industrial
  • Distribution Centers
  • Recycling Centers
  • Super Markets/Retail Centers

2R63 BALER

medium_hv10
2R63-olson2
2R63-olson6
2R63D-Goodwill
2R63D-Rollerchain
2R63D-2
2R63-olson2
2R63-olson6
2R63D-Goodwill-1
2R63D-Rollerchain-1
2R63D-2
2R63-olson2
2R63-olson6
2R63D-Goodwill-1
2R63D-Rollerchain-1
previous arrow
next arrow

The EXCEL® Model EX62/63 bales the following materials: 
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials. 

Standard features include:

  • Hydraulic door latch (EX63 only)
  • Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
  • The EX63F is manufactured standard with either left-hand or right-hand door swing
  • 20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable shear blade with four cutting edges
  • Six fully guided wire tie slots
  • Automatic bale sizing system
  • Automatic shear jam correction
  • Short-stroke feature to reduce cycle time
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Remote controls — according to door swing
  • Safety interlock door with decompression
  • Clean-out tool, grease gun and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC -controlled operation
  • Available with an EXCEL® above-ground or inground conveyor for a turnkey system

STRUCTURAL

  • HEIGHT: 62” Loading 52 1/2” Frame (158cm)
  • LENGTH: 179” (455cm)
  • WIDTH: 77” (196cm)
  • CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
  • FEED OPENING: 54” W (137cm) x 35” L (89cm)
  • BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

  • PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
  • DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
  • CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
  • OIL RESERVOIR: 105 gal. (399 liters)
  • DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
  • MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • ENCLOSURE: NEMA 12 Rated, UL Approved
  • CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
  • HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
  • OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
  • PLATEN PSI: 92 PSI (6.33 BAR)
  • CYCLE TIME: 29 sec. – 21 sec. Short Stroke
  • TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

  • OCC : 1,200 lbs. (544kg) TPH 3.3
  • MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
  • NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
  • OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
  • HDPE: 1,100 lbs. (499kg) TPH 2.3
  • PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
  • ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
  • TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

  • Manufacturing and Industrial
  • Distribution Centers
  • Recycling Centers
  • Super Markets/Retail Centers